Dave Smith Instruments Evolver User Manual download pdf (Page 41)

MIDI Implementation

The Poly Evolver receives MIDI data according to the mode controls in the Global

Section. When in Combo mode, the Global parameters may be overridden by the

Combo settings. In addition, there is interaction between some of the Program

parameters which determine the overall response of Evolver to MIDI data. Following

are all the parameters that affect response to MIDI.

Global Parameters

MIDI Channel: ALL, 1…16 Select which MIDI channel to send

and receive data, 1 to 16. All receives on any channel.

Poly Chain: see table Poly Chain is used to link multiple Evolvers and

Poly Evolvers into a polyphonic system by selectively passing MIDI data through to

the MIDI out jack where it can be routed to another Poly Evolver. Note that MIDI

clocks are handled separately per the MIDI Clock parameter (you will likely want to

use the MIDI In and OUT clock setting). Settings:

Display Poly Chain Status

Off

MIDI operation is normal.

All MIDI information is passed through to the MIDI out jack

Note

Only MIDI note data is passed through to the MIDI out jack.

Clock: see table Selects the MIDI clock status, and enables External

sequencer triggers, as follows:

Display MIDI Clock Setting

Internal

MIDI clock is neither sent nor received

MIDI Out

MIDI clock is sent

MIDI In

MIDI clock is received

M In Out

MIDI clock is received and transmitted (use

with Poly Chain)

In no ss

MIDI clock is received, but MIDI

start/stop/continue messages are ignored.

Program Parameters

Trigger: see table Selects the source of triggers/gates for the envelope

generators.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 71 72

No comments

Dave Smith Instruments Evolver User Manual Page 41